Search
Go

Feiyutech AK4500 3-Axis Gimbal

€799.99

Feiyutech AK4500 3-Axis Gimbal View Large Image
6970078071742

The first one uses an LCD touch screen in the whole industry, makes it easy to operate without the phone app, taking control of your machine, anywhere, anytime.

In Stock
Title Quantity Price Availability
Feiyutech AK4500 3-Axis Gimbal €799.99 In Stock
Add To Basket Add to Wishlist

Control gimbal on the touch screen

The flexibletouch gimbal is more convenient to operate, displaying the current mode status, and easily switching or selecting the function modes with one button to shoot a wonderful view.

Control camera parameters on the touch screen

Connect camera to the gimbal, the operation will be more convenient. You can switch the screen by sliding it left and right, and easily adjust the camera parameter settings such as ISO, white balance, and so on.

Smart touch screen, different feeling

Control machine at any time is the most important thingto the photographer. AK4500 is equipped with an LCD touch screen that allows you to set almost all parameters of the gimbaldirectly, as well as camera parameters, without phone APP.

Quick install without leveling

Double-layer quick install board design is initiated in the whole industry. Manfrotto standard design and Benro design gives you an extraordinary convenient experience. Use the same camera and lens, needn't to level again.The unique quick installation system is designed with a secondary structure, compatible with the Manfrottoand the ARCA Swiss Typestandard, which makes photographers to quickly change equipment. After leveling the camera, the camera can be quickly removed and installed without leveling again, improving the shooting efficiency and get extraordinary experience!

Three-axis lock button, detachable handle

Create the best detail experience: the motor is equipped with a lock button design, can be used to fix the three-axis when leveling and storage, to prevent shaking. The handle is detachable, saving storage space and carrying convenience.

Ingenious craftsmanship

Beveled design allows for greater range of motion capture when shooting view.High-precision magnetic induction knob not only can control the focus and zoom but also can be used to control the high-precision rotation of the motor, giving you an extraordinary experience.Multi-function USB extension interface makes the expansion unlimited.

Shadow Hunter mode

One key for turning on the shadow hunter mode. Increasing the follow rate of motor in a short time, so that allowing the gimbal to achieve quick effect of transition and capture the fast moving moment. The eye-catching video can be made without complicated operation and post production.

Main Features Max payload updates to 10.14lb(4.6KG), easily work with popular DSLR and cinema camera. Detachable versatile design, switch between single handle, underslung position and separate hyperlink remote control to use in more different shooting scenes. Quick release plate design for camera to get real quick setup in one second. Bottom mounting plate is compatible with Manfrotto PL501, upper quick release plate is compatible with ARCA quick release system, which can fast switch between two popular quick release systems and AK4500. Three axis motor-locking design to get a convenient balance and storage. Touch panel operation without APP to directly set up parameters and change mode. Full Chinese/English language display to get better interactive experience. Friendly lock and unlock screen feature to prevent mistakenly touching . Just touch one icon and you will directly enter Dutch-Angle shoot/Long exposure timelaspe/ Vlog selfie/ TikTok vertical shoot and got more popular shooting mode. Supply USB Cable control/Wireless control way to take picture/recording/timelapse. Dual available USB ports for external follow focus/Zoom in&out set. Customize trigger button, follow speed/dead zone, motor power, etc. to fit for different usage. Auto-adapt motor power and customize motor power to be chose to work with more cameras and lenses. Detachable main body from single handle , assemble single handle together with dual handle grip, directly control the gimbal and camera without any remote control. Basic version comes with Underslung arm and anti-slip Tripod, Standard version comes with Brushless follow-focus gear, underslung arm, Hyperlink remote , carbon fiber and anti-slip Tripod, customer can choose each version according to their need. (Note:blod fonts are new features for AK4500, normal fonts are old features with AK series gimbal)
Cameras Supported Payload:150g/0.33lb--4600g/10.14lb (lens and other accessories are included, and center of gravity of gimbal is balanced ).Part of cameras & lenses tested: 1 Canon 5D Mark III/ Mark IV/ 6D / 80D and other cameras with similar dimensions and weight Lenses: Canon EF 24-105mm f/4L IS USM, Canon EF 24-70mm f/2.8L USM, Canon EF 16-35mm f/2.8L II USM, Canon EF 17-40mm f/4L USM, Canon EF 35mm f/1.4L II USM, Canon EF 100mm f/2.8L IS USM Macro Lens + lens hood, Canon EF 85mm f/1.2 L II USM + lens hood, Canon EF 50mm f/1.2L USM (focus ring is stuck on lens support frame, only works in AF) Canon 1D X Mark II Lenses: Canon EF 35mm f/2 IS USM + lens hood, Canon EF 85mm f/1.2 L II USM+ lens hood, Canon EF 135mm f/2L USM+ lens hood, Canon EF 100mm f/2.8L IS USM Macro Lens + lens hood 2 Sony a7/ a9 series Lenses: Sony FE 16-35mm f/4, Sony FE 24-105mm f/4 G OSS, Sony FE 12-24mm f/4 G, Sony E 50mm f/1.8 Mid-Range Lens, Sony E PZ 18-105mm f/4 OSS, Sony  FE85mm f /1.8, Sony  FE 35mm f/1.4 3 Panasonic, Nikon and other cameras, like GH5/GH5S, Nikon D850/Z6/Z7, Fuji XT3,etc. 4 Cinema Camcorder like Canon C100/C300 with lens EF-S 10-18mm f/4.5-5.6 IS STM Sony FS5 Bmpcc 4K with cage accessory
Battery 18650 rechargeable battery4, 2200mAh, 3.7V (please pay attention to installation of batteries) Battery charging via USB port on gimbal is not supported. Please use the charger provided for charging batteries.
Usage Time In Theory 12 Hours (When camera is balanced with gimbal)
Charging Time 5 hours by the charger provided and the adapter 5V/3A (quick charger is banned). When the indicator on charger give a solid red light, that means batteries are charging. With a solid blue light, batteries are fully charged.
Materials In Main Body Aluminum Alloys
Weight 1656g (not included the battery, shutter release cable, camera, lens and so forth)
Water-Proof Grade Not Water-proof
Dimensions 429240175.3mm(Not included Detachable support frame)
Rotatable Range Tilt: 230(with limitation) Roll: 360 (Unlimited) Pan: 360 (Unlimited)
Controllable Range Tilt: +175 to -55 Roll: 360 (when parallel to the ground, and works in Dutch-Angle shoot mode, it could be automatically rotated 360in one circle or several circles) Pan: 360 (unlimited)
Quick release plate There are two kinds of quick release plate together in one.Bottom mounting plate is compatible with Manfrotto PL501, Upper quick release plate is compatible with ARCA quick release system, which can be removed from the gimbal together with the camera, and fast switch between two popular quick release systems without re-assembling and re-balancing the camera.
Installation of Camera and Balance Unlock the motor:Please remember to unlock the motor before mounting the camera and turning it on. Tighten the camera: Tighten the camera with 1/4 inch screw on upper quick release plate, slightly insert upper quick plate on bottom mounting plate, the auto-lock will automatically move back to fix the upper quick release plate, mount it on bottom mounting plate, and fix the mounting plate with safety lock. Fix hot shoe at upper side of the camera with fixing frame of tilt axis to get two-way fixation. (make hot shoe less tight to make a convenience of moving camera slightly back and forth and tighten it until tilt axis is balanced). Extension support applies to those with relatively higher heights, like Canon 5D/ 1DX series. Note: Please place the motor on the right side when putting the lens forward Please mount the lens support frame when the lens is longer than mounting plate. Balance: Step by step to adjust vertical and horizontal direction of tilt axis, roll axis and pan axis.The standard of balance: camera can stay there no matter where you point it to without holding by hand (tilt axis should be perfectly balanced).
Battery Installation and Power Unscrew tailcap and insert batteries based on the following picture.
On & Off Power on & off: long press the function button, the display will show FY and release it when you hear the beep tone.
Working mode Pan follow: The roll and tilt direction are fixed, and the camera moves according to the left-right movements of users hand. Follow mode: The roll direction is fixed, and camera moves according to the left-right movements, up-down movements of users hand. Lock mode: The orientation of the camera is fixed. All Follow Mode: All three axis of gimbal follows the movements of users hand.
Touch Screen Main interface:Show some working state, change working mode and operation Main display shows different camera modes, status of functions, including WiFi, Bluetooth, Battery, Working Modes, Zoom & Follow Focus & the axis controlled by Multifunction Knob. Note: Icon in grey means the option is not available. Swipe to left Once & Twice:adjust the parameters of camera when Wifi connection between gimbal and camera is done, including ISO, Exposure Compensation, Scenes, ect,.
Button operations Mode Button Single tap: switch between Pan Mode /Lock Mode. Joystick 1 Control gimbal and turn left/right/up/down 2 Adjust parameters of Rotation Time & Scroll Setting Camera Button 1 When WIFI of camera is connected with gimbal, single tap camera button to take photo 2 When shutter release cable is attached to both camera and gimbal, single tap camera button to have camera take photo. Please refer controllable camera listing to take photo. Video Button 1 When WIFI of camera is connected with gimbal, single tap camera button to control the recording. 2 When shutter release cable is attached to both camera and gimbal, single tap camera button to control the recording. Please refer controllable camera listing to control the recording. Power Button Long Press: power on & off Trigger Button Long Press and hold: Enter Follow Mode, back to previous mode after loose it. You can set up this operation to Lock mode, follow mode, sport mode with APP Double Tap: Reset gimbal, three axis return to initial level, and gimbal works in Pan Mode. Function Button Single tap function button on the main interface to lock/unlock Touch screen. When other interfaces are activated, single tap function button to go back to the main interface. Multi-function Knob Long Press: switch between gimbal control and camera control Single Tap: 1) when gimbal control is activated, single tap to switch among Pan Control / Roll Control / Tilt Control 2) when camera control is activated, and WiFi of camera is connected, single tap to switch between Zoom and Follow Focus options (They are available to those cameras whichprovide support). Besides, when a external follow focus unit is connected, its rotationcould be controlled.
How to control the camera USB cable control:Control picture-taking with camera button, control the recording with video button, it works with Sony ,Canon, Nikon, Panasonic camera in controllable listing. WIFI control:: Gimbal can connect with camera via Feiyu On app and WiFi. When connection is done, camera could be controlled to take photo/video/zoom/follow focus. Note: 1 WiFi feature should be included so that camera could be connected via WiFi. 2 Digital Zoom and Follow Focus could be performed when they are supported. Please refer to the list of controllable cameras. Because Sony does not open source of protocol, thus Follow focus is supported by Sony cameras. If needed, please attach a external follow focus to Sony Camera.
Motor Power Adjustment Auto-match of Motor power is available to the App or Touch Screen. Gimbal also performs the auto-match process after being turned on, according to the load detected.
Available Functions for Users One tap to change working mode, directly show the state of camera connection, Bluetooth ,battery at the display. One tap to enter Dutch Angle shoot, long exposure timelapse, Vlog Selfie and vertical shooting for TikTok, more special shooting way to be continued . Manually set up the rotation speed, picture interval, long exposure time and the movement route in auto-rotation mode for long exposure timelapse. Control and set up the camera, follow focus ,zoom in&out with USB cable control or WIFI control. Customize the trigger button, motor power, shooting mode, control object ,language,etc. Initialize the gimbal when it is not level. Manually set up the shooting angle on tilt axis by hand. Upgrade the firmware , Set up the parameter, virtual remote control on APP.
Extended Ports There are nine extended ports in single handle AK4500(basic version) One 1/4 thread hole on the top of sliding arm of tilt axis for installation of extension support or other accessories. One 1/4 thread hole behind tilt motor. USB port and 3.5mm round hole Under mounting plate to connect and control camera Each USB Port at the back and in front of mounting plate to connect external AFK II. 1/4 thread hole at the left and right side of pan motor to extension support other accessories, such as monitor, Mic and so forth. 1/4 thread hole at the bottom of the handle to mount Tripod or other accessories.
Accessories for basic version Sony USB cable:USB2.0 to Micro(A01)1,Canon USB Cable:USB 2.0 to Mini(B01)1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)1,Shutter release for Panasonic (L1)1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)1, Bottom mounting pate1,Upper quick release plate 1,support frame for tilt axis and round holder and long screw1 set, 18650 battery4, Underslung arm and tighten screw1 set , anti-slip tripod1, support frame for lens and fixed screw1, Thumb screw to fix the camera1, Micro USB charging cable1, battery charger1, EPP box. Note:Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)1 is not in the package yet.
Accessories for standard version Brushless AFKII1, Underslung arm and tighten screw1 set,Hyperlink remote control1set,Sony USB cable:USB2.0 to Micro(A01)1,Canon USB Cable: USB 2.0 to Mini(B01)1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)1,Shutter release for Panasonic (L1)1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)1, Bottom mounting pate1,Upper quick release plate 1,support frame for tilt axis and round holder and long screw1 set,, 18650 battery4, Carbon Fiber extension bar1, anti-slip tripod1, support frame for lens and fixed screw1, Thumb screw to fix the camera1, Micro USB charging cable1, battery charger1, EPP box. Note:Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)1 is not in the package yet.
Optional Accessory Tripod with 1/4" screw (pay attention to its max payload), Extension Accessories and Body-mounted Weight Support for installing flash lamp/ soft light/ Microphone and other devices via cold shoes.
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.

Sign Up