Pocket Wizard FlexTT5-Canon | Conns Cameras | Ireland

Pocket Wizard FlexTT5-Canon


Pocket Wizard FlexTT5-Canon View Large Image


The Most Versatile PocketWizard Radio Ever. The FlexTT5 Transceiver maximizes both E-TTL II and Manual Power Control capability of Canon photographic equipment by greatly expanding their operating environment. Lock your flash into the FlexTT5 built-in hot shoe, turn it on and you are ready to shoot. With both standard triggering channels and E-TTL II channels as well as Multi-zone capability, it's the perfect MultiMAX partner. But wait, there's more...

In Stock
Title Quantity Price Availability
Pocket Wizard FlexTT5-Canon €279.99 In Stock
Add To Basket Add to Wishlist

The dedicated FlexTT5™ Transceiver, with its built in hot-shoe and ControlTL™ firmware, is the perfect addition to Canon E-TTL II flash systems. The FlexTT5 takes the existing benefits of Canon wireless systems beyond the boundaries of infrared technology. When paired with the Mini TT1™ Transmitter or another FlexTT5 Transceiver, a whole new world of wireless flash freedom opens up. The FlexTT5 is also the perfect Transceiver for your manual triggering needs and works with all MultiMAX channels and many of the MultiMAX advanced functions.

VIDEO: An Introduction to ControlTL and the MiniTT1 Transmitter and FlexTT5 Transceiver - Photographer Mark Wallace walks you through all the basics.

The FlexTT5's simple design comes to life through its hot-shoe connection with a camera or flash. Mount a flash or command unit on the FlexTT5 to use the same zone controls and ratio commands as you would normally. The system tracks your changes in ISO, shutter speed and aperture and reacts accordingly to make sure exposures stay right on target. Use the flash compensation dial on your camera or flash just as you would normally and the changes pass seamlessly through the system.

The FlexTT5 has two channel configuration settings; C1 and C2. Each can be programmed as needed with up to 20 ControlTL channels* for TTL photography, or 32 standard channels** for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch for ease of use with Canon zones and ratios.
* - 20 ControlTL channels for FCC/IC 344 MHz radios and three ControlTL channels for CE 433 MHz radios. ** - 32 Standard channels for FCC/IC 344 MHz radios and 35 Standard channels for CE 433 MHz radios.

With PocketWizard HyperSync™ Technology, the FlexTT5 can precisely advance the timing of your flash trigger so that increased flash sync speeds, up to 1/500th of a second is achievable with many strobes.

Need more speed? Push your ControlTL system beyond 1/500th and go into FP/High-Speed sync mode automatically. Simply change your shutter speed to get flash sync all the way to 1/8000th. No buttons to press or settings to change!

VIDEO: Mark Wallace explains Optimized High Speed Sync

A PocketWizard Utility download is provided to support the FlexTT5 Transceiver via a USB port. The Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers as well as update your product to the latest firmware.

The FlexTT5 also has our Auto-Sensing Transceiver Technology that enables it to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job. When a hot-shoe or other trigger is detected, it automatically switches to Transmitter mode. With Auto Relay Mode you can easily trigger a remote camera in sync with remote flash. Put a camera where you can't be and use remote TTL or non-TTL lighting at the same time. Expand your coverage and increase your creativity.

TTL Compatibility Canon E-TTL II
Frequency: 340.00 - 354.00 MHz US FCC / IC
433.42 - 434.42 MHz CE
Channels: 52 Channels over 26 Frequencies (FCC/IC)
35 Channels over 5 Frequencies (CE)
Antenna: 2.7" (6.9 cm) rubberized with 180 degree swing
Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range Performance: 30 to 800 feet (10 to 240 meters) for E-TTL II triggering depending on flash used, antenna orientation and other variables.30 to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.For more info, click here.
Mounting: Hot Shoe, 1/4-20, lanyard, velcro
Maximum Shooting Rate  Frames per second (fps) 8 fps for E-TTL II and normal triggering
Power / Channel Switch OFF - C.2 - C.1
Zone Select Switch A-B-C (matches Canon slave groups)
Status Indicator LED: Green, Amber, Red status indications
Camera / P1 Port 1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering.  Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Flash / P2 Port 1/8" (3.5 mm) mono miniphone.  Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
Minimum Receive Contact Time Camera / P1 Port = 80 milliseconds Flash / P2 Port = 500us
Voltage Present 3.3 VDC (all pins) - safe for all cameras
Hot Shoe voltage protection: Hot Shoe: up to 50V
USB: USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
Operating Temperature Above -15? C (5? F) and below 50? C (120? F).
Storage Temperature (without battery) Above -30 C (-22 F) and below 85 C (185 F)
Construction High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin
Power Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
Battery Life 60 + Hours 
Dimensions 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
Weight 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
Included in the box FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide
ROHS Compliant  
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.

Sign Up