Beachtek DXA-HDV | Conns Cameras | Ireland

Beachtek DXA-HDV


Beachtek DXA-HDV View Large Image

The BeachTek DXA-HDV is a two-channel, active XLR adapter with built-in preamplifiers for attaching external microphones and other audio gear to any HDV camcorder that has a built-in mic jack. It can also be used with any other audio recording device that has a mic jack.

The DXA-HDV uses exceptionally low noise, wide bandwidth preamplifiers for superb audio. This allows you to record high quality audio directly to the camcorder which will always be in sync with the video.

In Stock
Title Quantity Price Availability
Beachtek DXA-HDV €349.99 In Stock
Add To Basket Add to Wishlist

The DXA-HDV is very easy to set up and use. It allows you to connect a wide variety of audio devices including wireless systems, mixers, sound boards and professional condenser microphones that require 48 volt phantom power to operate.

The level controls allow you to adjust the output signals going to the camcorder while the signal indicators give you an easy way to ensure optimum recording levels.

The adapter mounts to the bottom of the camcorder and can also be mounted to any standard tripod.

Maximum Input Levels MIC Level: +7 dBu LINE Level: +26 dBu
Output Level Nominal MIC levels
Frequency Response 20 Hz to 20 kHz (+/- 0.5 dB)
THD Less than 0.01 @ 1kHz, -30 dBu input
S/N Ratio 88 dB @ 1 Khz, -30 dBu input
Gain LO gain: 0 dB HI gain: 15 dB
Phantom Power Dual regulated 12 or 48 volt power supplies Current to 14 mA (direct short)
LEVEL Indicators Green: -48 dBu to -36 dBu Red: -35 dBu and over
Battery Type One 9 volt alkaline or lithium battery
Battery Duration 3 hours typical with alkaline battery (no phantom) 8 hours typical with lithium battery (no phantom)
Dimensions 5.5 x 2.5 x 1.5 (L x W x H) (140 mm x 64 mm x 38 mm)
Weight 10 oz (0.28 kg)
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.

Sign Up